__                 __                              
|__| ____   _______/  |______  _________  ___ ____  
|  |/    \ /  ___/\   __\__  \ \____ \  \/  // __ \ 
|  |   |  \\___ \  |  |  / __ \|  |_> >    <\  ___/ 
|__|___|  /____  > |__| (____  /   __/__/\_ \\___  >
        \/     \/            \/|__|        \/    \/ 

Copyright (C) Parallax System LLC. All rights reserved.
https://instapxe.com/eula


smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1127.el7.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST33000650SS
Revision:             0005
Compliance:           SPC-4
User Capacity:        3,000,592,982,016 bytes [3.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500424d3e9b
Serial number:        Z29414FN00009301VKMW
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jul 29 14:57:00 2024 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     34 C
Drive Trip Temperature:        68 C

Manufactured in week 43 of year 2013
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  5
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  5
Elements in grown defect list: 0

Vendor (Seagate Cache) information
  Blocks sent to initiator = 79177
  Blocks received from initiator = 196778
  Blocks read from cache and sent to initiator = 65
  Number of read and write commands whose size <= segment size = 37
  Number of read and write commands whose size > segment size = 0

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 62749.98
  number of minutes until next internal SMART test = 52

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:     144316        0         0    144316          0          0.041           0
write:         0        0         0         0          0          0.102           0
verify:     1112        0         0      1112          0          0.000           0

Non-medium error count:        6


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No Self-tests have been logged